Setting up a Brick Paver Walkway or Red Wall Bricks

Using Setting up a Brick Paver Walkway or Brick Packaging Machines or Pavers to produce a sidewalk or patio complements a home in a manner in which is unequaled. It includes a level of quality and sophistication to a house entryway that can not be attained with either concrete or asphalt. Brick and Pavers likewise can be found in several colors and shapes permitting for unique color pattern and patterns to be accomplished. In addition, setting up a Brick or Paver sidewalk does not always need a pro. With some fundamental knowledge and a fairly simple sidewalk plan, a property owner is capable of undertaking such a job.

The secret to installing a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be installed. The location must be removed at least a foot down, eliminating all topsoil and clay soil. In addition, string lines must be strung on each side of the walkway. The string lines indicate the ended up height of the sidewalk.
Once the area has actually been dug down, 3/4" gravel stone ought to be laid in and tamped down tightly. The height between the tamped down sand and the stringline must equate to the thickness of the brick or paver.

Now that you have a steady base, put a 1" pipeline or ledger board the length of the sidewalk on either side of the pathway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared location. These strips will act as your pathway border and assistance to maintain the integrity and shape of the sidewalk. You can get these plastic strip borders at the majority of more info house improvement shops. The strips must be anchored down with 12" galvinized nails. You ought to sink these nails into the ground and through the strips every foot.

When this is done, you can then start to lay the bricks/pavers. There are lots of patterns you can lay. I especially like the Herring Bone pattern. The secret to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will once again help maintain the stability of the sidewalk.

Inevitably bricks/pavers will require to be cut here or divided when developing the sidewalk. To in fact cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the spot where you desire to break the brick. If your pathway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and pack down securely.
Spread stone dust over the brand-new sidewalk and sweep into the fractures. This will finish the interlocking of the bricks and help to get rid of any weed growth.


In addition, setting up a Brick or Paver pathway does not always need a pro. The secret to setting up a Brick or Paver Walkway is to first appropriately prepare the area where the bricks/pavers are to be installed. Now that you have a stable base, position a 1" pipe or journal board the length of the sidewalk on either side of the walkway. These strips will act as your sidewalk border and help to preserve the stability and shape of the walkway. Undoubtedly bricks/pavers will need to be cut or split when developing the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *